Replacing a plumbing fixture, upgrading a heating system, or installing new air conditioning can involve more than choosing new equipment. The system needs to be properly sized, connected, configured, and installed so it can perform as intended.
Mars Plumbing & Heating provides plumbing, drain, heating, and cooling installation services for residential and commercial properties. Whether you’re planning a remodel, replacing outdated equipment, finishing a new space, or upgrading an existing system, professional installation can help ensure the new system works properly from the start.
New Plumbing Installation and Fixture Upgrades
Plumbing installation can be part of a renovation, an addition, a new construction project, or an upgrade to an existing home. The right installation needs to account for the fixtures being added, the existing plumbing system, water supply, drainage, and applicable requirements.
Mars provides installation and replacement for a range of plumbing fixtures and systems, including sinks, faucets, showers, tubs, toilets, water heaters, sump pumps, well pumps, gas lines, water filtration systems, and water softeners.
For example, replacing a water heater is not simply a matter of removing the old unit and connecting another one. The replacement needs to be appropriate for the property’s hot-water requirements and installed correctly for safe and dependable operation.
The same applies to fixture upgrades. A kitchen or bathroom renovation may require changes to existing plumbing so new fixtures can be positioned and connected properly.
If you’re planning an upgrade or replacement, new plumbing installation can help you explore the types of plumbing systems and fixtures Mars installs.
Drain Installation for Remodeling and New Construction
Drainage is an important part of any plumbing project. When a kitchen, bathroom, basement, addition, or new structure is being built or remodeled, the drainage system needs to be properly planned before the finished fixtures are installed.
Mars provides drain installation for kitchen sinks, garbage disposal connections, dishwasher drain lines, bathroom sinks, tubs, showers, toilets, floor drains, laundry areas, utility rooms, sewer lines, and main drains.
A new or replacement drain system also needs appropriate sizing, slope, venting, and connections. These details can affect how efficiently water leaves the fixture and can help prevent future drainage problems.
Drain installation can also become necessary when older plumbing is being replaced. Mars notes that it can replace outdated cast iron or galvanized drain piping with modern materials such as PVC or ABS when appropriate for the project and code requirements.
For remodeling, additions, or new construction, drain installation can help determine what type of drainage work may be needed.
New Air Conditioning System Installation
Replacing an aging air conditioner is an opportunity to address more than the outdoor equipment. Proper system sizing, ductwork, electrical connections, refrigerant lines, and thermostat integration all contribute to how a new system performs.
Mars installs central air conditioning systems and evaluates factors such as home size, layout, insulation, and cooling requirements when determining appropriate system sizing. Installation can include duct connections, refrigerant charging, electrical integration, condenser installation, and final performance testing.
Existing ductwork may also need attention during an A/C replacement. Restrictions, leaks, or incorrect sizing can affect airflow and make it harder for a new system to deliver consistent cooling. Mars’s installation process includes evaluating ductwork and making adjustments when needed.
A new thermostat can also be integrated with the system. Mars installs programmable and smart thermostats as part of its air conditioning installation services.
If an older system is becoming less reliable or no longer provides the expected level of cooling, new air conditioning system installation is an option to consider.
Heating System Installation and Replacement
A heating replacement is a significant home improvement, particularly when an older system is becoming inefficient, requires frequent repairs, or struggles to maintain consistent temperatures.
Mars installs several types of heating systems, including gas and electric furnaces, boilers, traditional and cold-climate heat pumps, and ductless mini-split systems.
The installation process starts with evaluating the home and its heating requirements. Factors such as square footage, insulation, ductwork, and the existing system can influence equipment selection and sizing. Mars then handles equipment removal, installation, system testing, and a walkthrough of the new system.
Different properties can call for different approaches. A furnace may be appropriate for a home with existing ductwork, while a ductless mini-split can provide a solution for an addition, remodeled area, or space without existing ducts. Heat pumps can also provide both heating and cooling from one system.
When an existing heating system is nearing the end of its useful life, heating system installation can help you understand replacement options.
When Does a Property Need New Installation?
Not every plumbing or HVAC problem requires a complete replacement. Sometimes a repair or maintenance visit is enough. Installation becomes more relevant when you’re replacing outdated equipment, remodeling, adding new fixtures, or building a new space.
You may want to consider an installation project when:
- A water heater or HVAC system is reaching the end of its service life
- An existing system requires increasingly frequent repairs
- A remodel changes the location or number of plumbing fixtures
- A bathroom or kitchen addition requires new drainage
- A new room needs heating or cooling
- Existing ductwork cannot adequately support a replacement A/C system
- You’re building a new home or addition
- Older plumbing materials need to be replaced
- A new system can provide capabilities the existing equipment cannot
The right solution depends on the condition of the existing system and the requirements of the property. A professional evaluation can help determine whether replacement, modification, or repair makes the most sense.
Installation Is About More Than the Equipment
The equipment or fixture itself is only one part of an installation project. Plumbing connections, drainage, electrical components, ductwork, system sizing, and overall compatibility can all affect the final result.
That’s particularly important when replacing one system with another. A new furnace, air conditioner, water heater, or drain system needs to work with the property’s existing infrastructure—or the supporting components may need to be updated as part of the project.
Planning the installation around the entire system helps avoid problems that may not become apparent until after the project is complete.
Frequently Asked Questions
What plumbing systems does Mars install?
Mars installs and replaces sinks, faucets, showers, tubs, toilets, water heaters, sump pumps, well pumps, gas lines, water filtration systems, and water softeners.
When is drain installation needed?
Drain installation may be needed during kitchen or bathroom remodeling, new construction, additions, replacement of outdated drain piping, or projects requiring a new sewer connection.
What does a new air conditioning installation include?
A new A/C installation can include system sizing, equipment installation, duct connections, refrigerant charging, electrical integration, condenser installation, and final system testing.
What types of heating systems does Mars install?
Mars installs gas and electric furnaces, boilers, traditional and cold-climate heat pumps, and ductless mini-split systems.
Should I repair or replace an older HVAC system?
The answer depends on the system’s age, condition, repair history, performance, and efficiency. Frequent repairs, rising energy costs, uneven heating or cooling, and declining performance can all be reasons to evaluate replacement options.
Plan Your Plumbing or HVAC Installation
Whether you’re remodeling a bathroom, replacing an aging water heater, adding a new drainage system, or upgrading heating or cooling equipment, proper installation can make a significant difference in long-term performance.
Mars Plumbing & Heating can help evaluate the project, identify the appropriate installation approach, and complete the work needed for the new system.
Contact Mars Plumbing & Heating to discuss your plumbing or HVAC installation project.